![]() ![]()
They can also be used by both right and left-handed individuals. UGEE has an impressive line of graphics tablets that are worth a closer look.Īll of UGEE’s graphics tablets are designed to be user-friendly. You can lower your resolution through your computer’s display settings – set the resolution to “recommended” resolution or the monitor and if that doesn’t work, try using lower resolution.Whether you’re a graphic artist, digital artist or someone who just loves to create, you’ll need a high-quality graphics tablet to bring your visions to life. If Ugee resolution is (for example) 1440*900, then the computer monitor resolution must be equal or lower than the Ugee monitor’s native resolution Please follow the below steps to see if you can resolve the problem:ġ.Compare the resolutions of 2 screens (Ugee monitor and your computer monitor) When display set finished, please open the Pen Tablet Setting and go to the Monitor Setting window. Select monitor 1 or 2 depending on your setting of 1 or 2 before.ġ0、Pen calibration on my monitor display tablet is off/inaccurate If you want to set to extend mode, you can set the tablet to the monitor 1 or 2. If you want to set to mirror mode, both of the monitors must be set the same DPI. Please go to the display setting in the system control panel. #UGEE M1000L REPLACEMENT PEN FULL#The red LED light will kept on shinning until full charge. Please plug the USB charge cable to the Pen and computer’s USB port to charge. If the stylus goes to low battery, the blue LED light on pen barrel will turn on. After finish setting, please reboot the computer, and use the drawing display as usual. If not, the pen and cursor will have some of inch distance. When using the mirror mode, the DPI of both monitors must be the same. Please unplug and re-plug your USB/dongle if the problem is not fixed please change to another USB port.ħ、When using the mirror mode, the pen and cursor have some of inch distance. #UGEE M1000L REPLACEMENT PEN PC#This indicates that the USB port of your PC has a bad connection or the power from it is not stable. If you use USB to D-sub, DVI or HDMI trans adapter, please make sure it is in good condition before using.Ħ、Why is the LED of my tablet blinking continuously? Try to test pen display with another computer. Make sure one of VGA, DVI or HDMI cable has connected to both the pen display and computer, and be connected tightly. When the problem still exists, there should be hardware damage with the Artist or stylus.ĥ、My Pen Display shows no signal (The power light appears red.) If the stylus also can’t control the cursor even you have not installed the driver, please try to test the tablet using another computer. #UGEE M1000L REPLACEMENT PEN INSTALL#When the system returns to the desktop, please connect the tablet to the computer directly (doesn’t need install driver) and test whether you can use the stylus to control the cursor or not. #UGEE M1000L REPLACEMENT PEN DRIVER#Try to remove the driver and reboot the computer. If it always blinks, please unplug and plug again or try to connect it to another USB port. When the stylus is far away from the sensitive height of the tablet, please check the LED light of the tablet is on or off. If yes, please try to unplug and re-plug it to another USB port, or change another USB cable. ![]() Please make sure your USB cable has connected to computer? If not, please connect it. If your computer or notebook has no VGA, DVI or HDMI ports, you can buy a USB to VGA or HDMI trans adapter for using.Ĥ、When tablets connects to the computer, but the cursor of stylus can not move ![]() The USB cable is only for drawing-data, not for display data transmission, so you must connect both USB cable and one of the VGA, DVI or HDMI cable. (2). Explore → → Uninstall a program→ Ugee and choose įollow the instructions until uninstall is completed.ģ、My notebook has no VGA, DVI or HDMI ports, can I only plug the USB to use the Monitor Display? In the Coordinate function, select Absolute or Relative mode. Go to the “pen tablet setting-button” window. 1、How to switch between Absolute and Relative modes? ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |